Cleanline Clusterflush

Instructions For Use:

1. Take the faeces directly from the rectum of the calf. If the samples are liquid, take a spoonful.
2. If faeces are solid, remove the excess amount using a spatula.
3. Dilute the spoon content in the liquid of the small tube called sample tube.
4. Shake the sample tube to homogenize.
5. Tear the aluminium envelope open at the notch. Once the device has been taken out of the envelope its stability is of short duration, especially in a humid environment.
6. Remove the tube’s protective caps.
7. Break the blue end.
8. Place the cartridge on a completely level surface. Deposit three drops in each small hole. Leave the device on a flat surface and wait for 10 minutes. The liquid contained in the sample tube moves to the strip and slowly migrates along the strips.
9. After 10 minutes, read the results using the picture below as standard.